Connection Cable for Red Dragon® 3 Speedy 150W and 230W pump with 10V connetion
to the Controller/Computer
Technical data connection cable for Red Dragon® 3 Speedy pump :
for the connection of your Red Dragon® 3 (150W & 230W) pump with 10V connection to your aquarien-computer/contoller
contents of delivery:
Operating_and_maintenance_manual.pdf
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Use the RD3 pump as a circulation pump!
Watch, how it works! Link to the video.
This cable allows a connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
Please choose your right connection-cable!
Tested so far folowing these two computers:
GHL ProfiLux 3.1 and from Neptune Systems the Apex Aqua Controller.
Compatible with following brands:
https://www.aquariumcomputer.com/
http://www.neptunesystems.com/
https://www.reefai.com/
//////////////////////////////////////////////////////////////////////////////
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.
If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. From ~ 0,8V starts the pump at the lowest level (20W) and run. At an increase of 0,5V will increase the level, also. So 1V = 20W ….. 9V = 230W.
At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.
for aquariums/tanks from 264 - 792 gallons
Bubble King® Supermarin 250 RD3 internal:
adjustable Red Dragon® 3 Mini Speedy pump 50 Watt
528 gph Air (2.000 l/h)
Base plate:
Ø 10.63ʺ / height ~ 22.05ʺ (Ø 27 cm / height ~ 56 cm)
interface adapter
for 10V connection to GHL
for aquariums from 40 - 80 gal (150 up to 300 liter)
Bubble King® Double Cone 130:
max. 750 l/h Air - 3.500 l/h Water = 1 Pump RDX 3000 DC 12V
Base plate: 16 cm x 22 cm / height ~ 46 cm
For all Bubble King® DeLuxe and Bubble King® Supermarin Model´s internal
and Bubble King® Double Cone 250-300
connection from pump to skimmer
230 Watt/h 22' (6,75 mtr.) pressure height
speed adjustable Brushless DC pump
with 10V connection
This Product was added to our catalogue on 06/11/2015.